Filter
Top Products
Print Task Quick Sets
Use the Print Task Quick Sets control to store the current combination of driver settings that appear
on all other Properties driver tabs. Print Task Quick Sets are either preset (by the administrator) or
user-defined printing specifications, such as media size and pages per sheet.
Status dialog box
The unlabeled dialog box on the Job Storage tab contains a status message about the destination of
a print job. The status information changes depending on the selections that are made on the Job
Storage tab.
Job Storage Mode
Use the Job Storage Mode options on the HP LaserJet 5200 printer to store documents at the device
and then control their printing at the device control panel.
The HP LaserJet 5200 printer offers the following Job Storage Mode options:
●
Off
●
Proof and Hold
●
Private Job
These options and the settings that control them are described in the following sections.
Off
When selected, this option turns the job-storage feature off (it is disabled), which means that the print
job will not be stored in the device.
Proof and Hold
To use the Proof and Hold option, the job-storage feature must be enabled, and the device must have
a minimum total memory of 80 MB.
When selected, this option stores the print job in memory and prints only the first copy of the job, allowing
you to check the first copy. If the document prints correctly, you can print the remaining copies of the
print job at the device control panel. You can set the number of proof-and-hold print jobs that can be
stored in the device at the control panel.
After it is released for printing, the proof-and-hold job is immediately deleted from the device. If more
copies are needed, you must reprint the job from the software program. If you send a second proof-and-
hold job to the device with the same user name and job name as an existing proof-and-hold job (and
you have not released the original job for printing), the job will overwrite the existing job. Proof-and-hold
jobs are deleted if you turn off the device.
NOTE The device configuration can be set to hold a maximum of 50 quick-copy or proof-and-
hold jobs. The number is set at the device control panel in the CONFIGURATION menu, and the
default is 32. When this preset limit is reached, the new document overwrites the oldest held
document. Also, a document that has the same user name and job name as one that is already
stored on the device memory will overwrite the existing document.
ENWW Job Storage tab features 151
HP traditional print
drivers for MS Windows