Filter
Top Products
If you click Parallel Cable (a "direct connection" using a parallel cable), and then click Next, the
Installation Type dialog box opens.
To continue with the default installation sequence, see
Figure 3-20 Installation Type dialog box.
NOTE The printing-system software should be installed before the HP LaserJet 5200 printer is
connected to the computer through a parallel or USB connection and turned on. During the
installation process, the software will prompt you to connect the device during installation.
If you are installing the HP LaserJet 5200 printer over the network, click Wired Networking in the Printer
Connection dialog box.
For a network installation, the HP LaserJet 5200 printer must be connected to the network and turned
on before the printing-system software is installed so that the software can detect the printer.
NOTE For wireless installation instructions using an HP Jetdirect ew2400 802.11g Wireless
Print Server or an HP Direct 380x802.11B wireless print server, consult the documentation that
comes with the print server.
Click Next to continue. The Searching dialog box opens, as shown in the following figure.
Figure 3-8 Searching dialog box
NOTE If you are installing the device over a network, you must let the search for the first subnet
in the network finish in order to find all available printers. After the first subnet is scanned for
available HP LaserJet 5200 printers, the results appear in the Printers Found dialog box.
However, the installer continues to search the network for additional printers after the first results
appear. The results of searching the first subnet usually takes place within about 20 seconds. It
might take some time for the installer to search the other subnets and for the full list of printers
to appear in the Printers Found dialog box (see
Figure 3-11 Printers Found dialog box),
depending on the configuration of the network.
62 Chapter 3 Install MS Windows printing-system components ENWW
MS Windows install