Filter
Top Products
Copy Count
Copy Count specifies the number of copies to print. This driver setting is useful for software programs
that do not provide a copy count. If a copy count is available in the software program, set the copy count
in the software program.
The number of copies that you request appears in the Copy Count option. You can select the number
by typing in the box or by using the up and down arrows to the right of the text box. Valid entries are
numbers from 1 to 9999. The copies value will not advance from the maximum number (9999) to 1 when
the up arrow is used, or change from 1 to the maximum number (9999) when the down arrow is used.
When you click another group box or leave the Advanced tab, invalid entries into the edit box (such as
non-numerical input, numbers less than 1, or numbers greater than the maximum allowed) are changed
to the last valid value that appeared in the box. The default number of copies is 1.
Because you can set the number of copies that you want from some software programs, conflicts
between the software program that you are using and the driver can arise. In most cases, the software
program and the driver communicate, so that the number of copies set in one location (such as the
software program) will appear in the other (such as the driver).
NOTE For some software programs, this communication does not take place, and the copies
values are treated independently. For these software programs, setting 10 copies in the program
and then setting 10 copies in the driver will result in 100 copies (10 x 10) being printed. It is
recommended that you set the number of copies in the software program, wherever possible.
Collated
The Collated check box is visible when the Copy Count setting is selected. The check box becomes
available and can be changed when the Copy Count setting is greater than 1.
When collated, pages print consecutively for each copy of the document. When not collated, copies of
each page print together.
This setting is not synchronized with the collate setting in the software program Print dialog box. Settings
in the software program override settings in the print driver. For instance, when using Microsoft Word,
the Collate check box in the Print dialog box is selected by default. However, in the print driver, the
Collated check box in the Advanced tab is not selected by default. The software program setting takes
precedence over the driver setting, and the printed output is collated by default.
To obtain uncollated printed output, clear the Collate setting in both the driver and the software program.
Similarly, if the Collated check box is selected in the driver, but the Collate setting is not enabled in the
software program, the printed output is uncollated.
Graphic
The Graphic setting contains the following control:
●
True Type Font settings
True Type Font
Use Substitute with Device Font (the default setting) to print documents that contain TrueType fonts
by using equivalent printer fonts. This permits faster printing; however, you might lose special characters
that the equivalent printer font does not support. Select Download as Softfont to download TrueType
fonts for printing instead of using printer fonts.
ENWW Advanced tab features 203
HP unidrivers for
Windows