Filter
Top Products
millimeter. Any non-numerical entry reverts to the last valid entry. Width and height entries are validated
when the focus has changed.
The resolution of each control is 1 millimeter or 1/10 of an inch, depending on the current measurement
units.
Units
To change measurement units, click one of the options in the Units group box (either Inches or
Millimeters).
Custom width and height control limits
The minimum media size for the HP LaserJet 5200 printer is 76.2 x 127 mm (3 x 5 inches) and the
maximum is 215.9 x 355.6 mm (8.5 x 14 inches). The following table summarizes media size limits for
each media-handling device.
Table 5-2 PCL 6 custom media sizes
Tray Dimensions Minimum Maximum
Tray 1 (100-sheet
multipurpose)
Width 76 mm (3.0 inches) 312 mm (12.28 inches)
Height 127 mm (5.0 inches) 470 mm (18.5 inches)
Tray 2 (250-sheet) Width 148.0 mm (5.83 inches) 297 mm (11.7 inches)
Height 210 mm (8.26 inches) 432 mm (17 inches)
Tray 3 (500-sheet, optional) Width 148.0 mm (5.83 inches) 297 mm (11.7 inches)
Height 210 mm (8.26 inches) 432 mm (17 inches)
Duplexing unit Width 148.0 mm (5.83 inches) 297 mm (11.7 inches)
Height 210.0 mm (8.26 inches) 432 mm (17 inches)
Source is
The Source is: setting specifies the source tray to use for printing a document. The list of source trays
depends on the device accessories that are installed. Any optional source trays that are installed through
the Device Settings tab also appear here.
The Source is: drop-down menu can contain the following options, depending on what has been
installed on the device:
●
Automatically select
●
Printer Auto Select
●
Manual Feed in Tray 1
●
Tray 1 (100-sheet multipurpose tray)
●
Tray 2 (250-sheet tray)
●
Tray 3 (optional 500-sheet tray)
The default setting is Automatically Select. When this setting is selected, the HP LaserJet 5200 uses
the source tray that supports the media size that you have selected. If you select a source tray other
ENWW Paper/Quality tab features 215
HP unidrivers for
Windows