Filter
Top Products
When you change the print-driver setting to a media type that is not currently loaded in the device, a
control-panel message appears that prompts you to load the media type or select another tray.
Use Different Paper/Covers
You can print books that are comprised of different media types using the Use Different Paper/
Covers options.
When you select the Use Different Paper/Covers check box, the following settings can appear in the
group box, along with associated options:
●
Front Cover
●
First Page
●
Other Pages
●
Last Page
●
Back Cover
NOTE When you change the Source Is and Type is settings for any of the covers or pages,
the settings remain configured until you close the software program from which you are printing.
For example, if you select First Page and change the media source or type, and then select
Back Cover to change the media source or type, the check mark remains beside Front Cover
and the selected source and type settings remain in effect. The settings are cleared only when
you close the software program.
Front Cover
Use the Front Cover options to include a blank or preprinted front cover on a document, or to include
a front cover from a source tray that is different from the one that is used for the remainder of the
document.
The Front Cover setting and options are shown in the following figure.
Figure 4-14 Front Cover options
ENWW Paper tab features 143
HP traditional print
drivers for MS Windows