Filter
Top Products
●
More Options…
●
About …
●
Restore Defaults
Paper size
The Paper size selection area lists the paper or envelope sizes that the HP LaserJet 5200 printer
supports. Use the scroll bar to scroll through the list of supported media sizes (forms), and then click
the icon to specify the media that you want.
A red circle with a line through any of the paper icons means that paper size is available, but you must
change a driver setting before you can print on that media size. The setting might be on the Paper tab,
such as the Paper source setting, or it might be a setting on the device control panel.
Clicking Custom page 1, Custom page 2, or Custom page 3 makes the Custom button available at
the bottom of the Paper tab. Clicking Custom opens the Custom-defined size dialog box that you can
use to define a custom paper size.
The following figure shows the Custom-defined size dialog box.
Figure 4-26 Custom-designed size dialog box
The following controls appear on the Custom-defined size dialog box:
●
Paper name text box. Use this option to type a name for this custom media size. You can define
up to three custom sizes at one time.
●
Width spin box. Use this control to specify the width for this custom media size.
●
Length spin box. Use this control to specify the length for this custom media size.
●
Units group box. Click Inches or Millimeters to specify the measurement unit for this custom
media size.
●
Transverse check box. Clicking this check box rotates the document 90° when it is printed on a
roll-fed device. Depending on the size of the printed page, you might save media` if you rotate the
page when printing.
●
Restore defaults button. Click this button to restore the settings in the Custom-defined size dialog
box to their original values.
ENWW HP Traditional Postscript 3 Emulation Driver features 171
HP traditional print
drivers for MS Windows