Filter
Top Products
When you disable the mopier, you are not necessarily disabling mopying, which the driver can still
perform through the software rather than the device hardware (the mopying path that is disabled when
you change the Mopy Mode setting to Disabled). However, a multiple-copy print job that is sent when
the mopier is disabled loses the advantage of transmitting the print job once, because the job is sent
through the network for each copy.
Mopier mode and collation
Mopying and collating print jobs are independent but closely related functions. Mopying, the ability to
send original print jobs to the device, is performed by the print driver. Collating can be controlled by
either the print driver or the document software program. The mopying mode is selected by default in
the driver, and can be disabled by changing the Mopier Mode setting on the Device Settings tab to
Disabled.
Control collation through the print driver by selecting or clearing the Collated check box on the
Advanced tab. You can clear the check box, which is available only when the Copy Count option is
set to more than 1 copy, to allow the software program to control collation.
To receive uncollated multiple copies of a print job, you must clear the Collated check box and make
sure that the software program collation feature is not selected.
The following table shows the relation between mopier mode settings and collation settings in the
software program and the driver. The first three columns show the settings; the last column, "Expected
result", shows how a 3-page print job would appear.
Table 5-5 Driver mopier mode and collation settings
Mopier mode Application collation Driver collation Expected result
Disabled Not selected Not selected 3 copies uncollated
Disabled Not selected Selected 3 copies uncollated
Disabled Selected Not selected 3 copies collated
Disabled Selected Selected 3 copies collated
Enabled Not selected Not selected 3 copies uncollated
Enabled Not selected Selected 3 copies uncollated
Enabled Selected Not selected 3 copies collated
Enabled Selected Selected 3 copies collated
Postscript Passthrough (PS Emulation Unidriver only)
Postscript Passthrough is enabled by default, and must be enabled for most print jobs. Postscript
passthrough provides additional capabilities for some software programs when printing to a postscript
driver. Options such as Watermarks, n-up and Booklet Printing might not print correctly from some
software programs with Postscript Passthrough enabled, because such programs send postscript
information to the printer that cannot be controlled by the driver. Other programs might print using these
options without problems. Select Disabled and print the document again if you encounter problems.
NOTE In some cases, disabling Postscript Passthrough can cause unexpected results within
a software program.
ENWW Device Settings tab features 261
HP unidrivers for
Windows