Filter
Top Products
103
Operator Panel Menus
Fax Parity Even
Odd
None*
Ignore
The Fax Parity setting lets you select the parity for fax data frames.
Even Theportexpectstoreceivedataframeswithanevennumberoflogical1’sper
byte. The port transmits XOFF and XON with even parity. If the port detects a
parity error, it sends an inverted question mark to the printer instead of the
character sent by the host system.
Odd Theportexpectstoreceivedataframeswithanoddnumberoflogical1’sperbyte.
The printer transmits XOFF and XON with odd parity. If the printer detects a parity
error, it sends X'5F' to the printer instead of the character sent by the host system.
None The port expects no parity bit when it receives data. The port transmits XON and
XOFF without parity bits.
Ignore The port expects a parity bit when it receives a data frame. The port ignores the
parity bit and uses even parity when it transmits XON and XOFF.
Refer to the
Technical Reference
for more information about parity.
Fax Buffer Disabled
Auto*
105K to max size allowed
You can configure the size of the fax input buffer to meet the requirements of your system. If
the limited size of the input buffer is preventing you from receiving fax data, you may want to
increase the fax buffer size.
The maximum size depends on the amount of memory in your printer, the size of the other link
buffers and whether the
Resource Save setting is set to On or Off. To maximize the range for
the fax buffer size, you can disable or reduce the size of the parallel, infrared, LocalTalk, and
USB buffers.
Choose
Auto to let the printer calculate a buffer size proportional to the total amount of
available printer memory. In most cases,
Auto is the recommended setting.
Note: Changing the
Fax Buffer setting automatically resets the printer.
Fax Menu (continued)
Menu Item Values
*Factory default