Filter
Top Products
157
Status Messages
Res Reduced
<warning>
The resolution of the page is reduced from 600 dots per inch (dpi) to 300 dpi to prevent
a
38 Memory Full error. Res Reduced displays for the duration of the current job. The
printer indicator light blinks while the printer is processing data.
• Press
Stop to take the printer out of the Res Reduced state. The Not Ready
message displays. Press Go to return to Res Reduced.
• Cancel the current job. Press
Menu> or <Menu.TheJOB MENU displays. Press
Menu> or <Menu until Cancel Job appears on the second line of the operator panel
display. Press
Select.
Warning messages are displayed on line 2 of the operator panel. See “Warning
Messages” on page 158 for more information.
Resetting the
Printer
The printer is deleting any print jobs in process and restoring all printer settings to user
defaults.
No button actions are possible while this message displays.
Restoring
Factory Defaults
The printer is restoring factory defaults. Factory defaults are restored by selecting
Factory Defaults in the UTILITIES MENU or by selecting Factory Defaults in the
CONFIG MENU.
See page 57 or page 107 for details about which printer settings are affected.
No button actions are possible while this message displays.
Waiting
<warning>
Waiting displays when one of the following occurs:
• The printer has received a page of data to print, but is waiting for an End of Job
command, Form Feed command, or for additional data.
Waiting displays until the
Print Timeout occurs or additional data is received.
• When
Collation is set to On, but the print job has not been canceled. Termination of
the print job is required before page collated copies print.
Note: The printer language appears on line 1 to the right of the
Waiting message.
• Press
Go to print the contents of the buffer.
• Press
Stop to take the printer out of the Waiting state. The Not Ready message
displays. Press
Go to return to Waiting.
• Cancel the current job. Press
Menu> or <Menu.TheJOB MENU displays. Press
Menu> or <Menu until Cancel Job appears on the second line of the operator panel
display. Press
Select.
• Reset the printer. Press
Menu> or <Menu.TheJOB MENU displays. Press Menu>
or <Menu until Reset Printer appears on the second line of the operator panel
display. Press
Select.
Note: Resetting the printer deletes all current data from the print buffer, including all
Print and Hold jobs. See
Reset Printer on page 70 for more information.
Warning messages are displayed on line 2 of the operator panel. See “Warning
Messages” on page 158 for more information.
Status Message Meaning and Actions Allowed While Message Displays