Filter
Top Products
127
Loading Print Material
5 Flex the sheets back and forth to loosen them, then
fan them. Donotfoldorcreasetheprintmaterial.
Straighten the edges on a level surface.
6 Place the print material against the left side of the
input tray and insert it under the metal stop.
Makesuretherecommendedprintsideisfacedown
andthefrontedgeisplacedtowardthefrontofthe
input tray.
For information on loading letterhead, see “Printing
on Letterhead” on page 135.
Note: Make sure the print
material fits easily under the
metal stop and is not bent or
wrinkled. Do not raise the metal
stop or force print material under
the metal stop.
Metal Stop