Filter
Top Products
58
Chapter 3: Using the Operator Panel and Menus
Format Flash Yes
No
Formatting the flash memory option deletes all resources (fonts, macros, symbol sets) stored
in flash memory and prepares the flash memory card to receive new resources.
The
Format Flash menu item only displays if the installed flash memory option is
not
defective
or Read/Write or Write protected.
51 Defective Flash may display when the printer is turned
on, or during flash format and write operations. See
51 Defective Flash on page 161 for more
information.
Warning: If you select
Format Flash and press Go, anydatastoredinflashmemoryislost.
Do not turn off the printer while the flash is formatting
.
Defragment Flash Yes
No
Defragmenting the flash memory option transfers all undeleted resources stored in flash
memory to printer memory and then reformats the flash memory option. When the format
operation is complete, the undeleted resources are loaded back into flash memory.
The
Defragment Flash menu item only displays if the installed flash memory option is
not
defective or Read/Write or Write protected. 51 Defective Flash may display when the printer is
turned on, or during flash format and write operations. See
51 Defective Flash on page 161
for more information.
37 Insufficient Defrag Memory displays if printer memory is too full to perform the Flash
Memory Defragment operation. See
37 Insufficient Defrag Memory on page 160 for more
information.
Warning:
Do not turn off the printer while the flash is defragmenting
.
Format Disk Yes
No
Formatting the hard disk option deletes all resources stored on the hard disk and prepares it
to receive new resources.
The
Format Disk menu item only displays if the installed hard disk option is
not
defective or
Read/Write or Write protected.
61 Defective Disk may display when the printer is turned on, or
during disk format and write operations. See
61 Defective Disk on page 165 for more infor-
mation.
Format Disk does
not
display if Job Buffer Size is set to 100%.SeeJob Buffer Size on
page 77 for more information.
Warning: If you select
Format Disk and press Go, any data stored on the hard disk option is
lost.
Do not turn off the printer while the hard disk is formatting.
Utilities Menu (continued)
Menu Item Values