Filter
Top Products
167
Attendance Messages
Change <input source>
<Custom Type Name>
<size>
<type><size>
The printer requests a different print material than what is loaded in the tray or set in
the
PAPER SIZE or PAPER TYPE menus.
Line 1 displays the input source (
<input source>), which is one of the following items:
• Tr ay 1
• Tr ay 2
• MP Feeder
Note: Tray 2 only displays if the optional 500-sheet drawer is installed.
Line 2 displays one of the following items:
•
<Custom Type Name>: A user-defined name for Custom Type 1 through 6. The
name is truncated to fit on the operator panel display. Use the MarkVision utility to
create Custom Type names. See “Introducing MarkVision” on page 25 for more
information.
•
<size>: If the requested type matches the type currently in the paper source and the
custom type name has not been defined by you, only the print material or envelope
size (
<size>) displays. The name is truncated to fit on the operator panel display.
•
<type><size>: The requested type (<type>) is a type other than a custom type. The
requested size (
<size>) of print material or envelope displays. The type and size
names are truncated to fit on the operator panel display.
If you are using Tray 1 or Tray 2 when this message displays, you can:
• Load the requested size and type print material in the input source. Press
Go to
continue printing.
• Press
Select to clear the message and continue printing on the print material
installed in the input source.
• Cancel the current job. Press Menu> or <Menu.TheJOB MENU displays. Press
Menu> or <Menu until Cancel Job appears on the second line of the operator panel
display. Press
Select.
• Reset the printer. Press
Menu> or <Menu.TheJOB MENU displays. Press Menu>
or <Menu until Reset Printer appears on the second line of the operator panel
display. Press
Select.
If you are using the multipurpose feeder when this message displays, you can:
• Load the requested size and type print material in the multipurpose feeder. The
printer will clear the message and automatically continue printing.
• If the correct print material is already loaded in the multipurpose feeder, press
Go.
• Cancel the current job. Press
Menu> or <Menu.TheJOB MENU displays. Press
Menu> or <Menu until Cancel Job appears on the second line of the operator panel
display. Press
Select.
• Reset the printer. Press
Menu> or <Menu.TheJOB MENU displays. Press Menu>
or <Menu until Reset Printer appears on the second line of the operator panel
display. Press
Select.
Note: Resetting the printer deletes all current data from the print buffer, including all
Print and Hold jobs. See
Reset Printer on page 70 for more information.
Attendance Message Meaning and Required Action