Filter
Top Products
191
Possible Paper Jam Areas
2 Remove the print material.
If there is resistance to the print material and it does
not move immediately when you pull, stop pulling.
Remove the print cartridge, return to the back of the
printer, and pull the print material out.
Note: If you cannot find the
jammed print material inside the
printer, check to see if the print
job has exited the standard out-
put bin.
3 Leave the rear output bin door open to allow the
job to finish printing.
4 Press Go to resume printing.
5 If you are going to print additional pages less than
152.4 mm (6 in.) in length, set
Paper Length to Short.