Filter
Top Products
41
Operator Panel Menus
Note: User default settings
remain in effect until you save
new settings or restore the fac-
tory defaults.
7 Press Select.
An asterisk (*) appears beside the value to indicate
that it is now the user default setting. The display
shows the new setting for one second and then
clears. The
Saved message displays, then the previ-
ous list of menu items appears on the operator
panel display.
8 Press Return to go back to previous menus or menu
items and set new default settings.
9 Press Go to return to Ready if this is the last printer
setting you want to change.
Disabling the
Operator Panel
Menus
To disable the menus so that changes cannot be made to
the printer default settings:
1 Turn the printer power Off (O).
Note: When the operator
panel menus are disabled,
access to the
JOB MENU is per-
mitted from the
Ready and Power
Saver
states. Access to the CON-
FIDENTIAL JOB
and HELD JOBS
menu items is permitted from
the
Ready state only.
2 Press and hold the Select and Return buttons and
turn the printer power On (|).
3 Release the buttons when Performing Self Test
appears on the operator panel display.
When the printer self test completes, the
CONFIG
MENU
displays.
4 Press Menu> until Panel Menus displays on the sec-
ond line.
5 Press Select.
6 Press Menu> until Disable displays on the second
line of the display.
7 Press Select.