Filter
Top Products
82
Chapter 3: Using the Operator Panel and Menus
TRAY RENUMBER Assign MP Feeder
Assign Tray 1
Assign Tray 2
Assign Man Paper
Assign Man Env
Each of the above menu items supports the following three values:
Off*
0...199
None
VIEW FACTORY DEF
Restore Defaults
Ye s
No
Note:
Assign Tray 2 only displays if the optional 500-sheet drawer is installed.
Assign MP Feeder only displays when Configure MP is set to Cassette.
Only installed paper sources display on the operator panel as values. However, you may set
TRAY RENUMBER to uninstalled sources.
The
TRAY RENUMBER menu item lets you configure your printer to work with printer drivers
or applications that use different source assignments to request a given input source.
Select
Off to use the factory default paper source assignments.
Select a numeric value (
0 ... 199)toassignacustomvaluetoapapersource.
Select
VIEW FACTORY DEF to view the factory default values assigned to each paper source.
In the
Restore Defaults menu item, select Yes to return all tray assignments to factory default
values.
See “Paper Sources and Sizes” on page 116 for information on available paper sources for
your printer.
Refer to the
Technical Reference
for more information about assigning source numbers.
Auto CR after LF Off*
On
The Auto CR after LF setting determines if the printer automatically performs a carriage return
after a line feed control command.
Auto LF after CR Off*
On
The Auto LF after CR setting determines if the printer automatically performs a line feed after
a carriage return control command.
PCL Emul Menu (continued)
Menu Item Values
*Factory default