Filter
Top Products
225
Installing the Optional Drawer
9 Place the printer on top of the support unit.
Make sure the edges of the printer and the support
unit are aligned properly.
10 Load print material in the input tray.
See “Loading Print Material” on page 124 for more
information.
11 Install the input tray in the support unit.
12 Reconnect all cables to the back of the printer.
13 Plug the printer power cord into a properly
grounded electrical outlet.
14 Turn the printer power On (|).
15 When Ready displays, press Menu> to enter the
menus.
Note: Verify that the optional
drawer is installed properly. See
“Verifying the Installation of
Options” on page 229.
16 Set the PAPER SIZE, PAPER TYPE,andPAPER
LENGTH
menu settings for this paper source.
See
PAPER SIZE on page 45, PAPER TYPE on page 47,
and
PAPER LENGTH on page 52 for more informa-
tion.
17 Press Go to return to the Ready state.
If an error message appears, see “Understanding
Printer Messages” on page 151.