Filter
Top Products
131
Loading Print Material
3 Flex the sheets back and forth to loosen them, then
fan them. Donotfoldorcreasetheprintmaterial.
Straighten the edges on a level surface.
Note: Do not load different
sizes or types of print material in
the multipurpose feeder at the
same time. Doing so may cause
a paper jam.
4 Locate the stack height limiter on the left side of
the printer.
5 Place the print material against the left side of the
multipurpose feeder with the recommended print
side face up and the top edge going in first toward
the printer.
Note: Do not exceed the maxi-
mum stack height limiter located
on the left side of the multipur-
pose feeder.
Stack Height Limiter