Filter
Top Products
166
Chapter 6: Understanding Printer Messages
202 Paper Jam
Open Rear Door
The printer detects a paper jam behind the rear output bin door. Open the rear output
bin door and gently remove the jammed print material. Close the rear output bin door.
See “202 Paper Jam - Open Rear Door” on page 186 for more information.
Press
Go to clear the message and continue printing. The printer prints a new copy of
the page that jammed if
Jam Recovery is set to On or Auto.However,theAuto setting
does not guarantee the page will print.
Once the print job is complete, close the rear output bin door.
203 Paper Jam
Short Paper
The printer detects a paper jam behind the rear output bin door. Open the rear output
bin door and gently remove the jammed print material. Leave the rear output bin door
open. Set
PAPER LENGTH to Short from the operator panel. See “203 Paper Jam -
Short Paper” on page 190 for more information.
Press
Go to clear the message and continue printing. The printer prints a new copy of
the page that jammed if
Jam Recovery is set to On or Auto.However,theAuto setting
does not guarantee the page will print.
Once the print job is complete, close the rear output bin door.
250 Paper Jam
Check MP Feeder
The printer detects a paper jam in the multipurpose feeder. If the print material is
visible from the front of the multipurpose feeder, pull it out gently. If only a small portion
is visible, open the upper front door, remove the print cartridge, and remove the
jammed print material. Reinstall the cartridge and close the upper front door. See “250
Paper Jam - Check MP Feeder” on page 192 for more information.
Press
Go to clear the message and continue printing. The printer prints a new copy of
the page that jammed if
Jam Recovery is set to On or Auto.However,theAuto setting
does not guarantee the page will print.
900-999 service
messages
These service messages indicate printer failures that may require service.
When a service message occurs, the printer immediately stops printing. Turn the
printer power Off (O), wait for about 10 seconds, and then turn the printer power
On (|).
If the service message recurs, call for service and report the message number and
description of the problem.
Attendance Message Meaning and Required Action