Filter
Top Products
213
Understanding Option Cards
You can purchase:
• A hard disk with an adapter card already installed.
• AharddiskthatsupportsOptraForms
TM
with an
adapter card already installed. Refer to Optra Forms
for more information.
• A hard disk adapter card for installing a separately
purchasedharddisk.
Complete the following instructions to attach the hard
disk to the adapter card. If your disk is already attached to
acard,goto“Accessing the Printer System Board” on
page 201.
Attaching a Hard Disk to the Adapter Card
You can use the adapter card with any hard disk meeting
the following criteria:
• 2.5-inch platter
• ATA-2 (IDE) interface
• Maximum thickness of 15 mm (.59 in.)
To attach the hard disk to the adapter card:
1 Align the connector pins on the end of the hard
disk with the connector on the back of the adapter
card.
Hard Disk
Adapter Card