Filter
Top Products
165
Attendance Messages
58 Too Many
Flash Options
The printer detects more than one flash option installed. Your printer can only have
one flash option installed.
• Press
Go to clear the error.
• Turn the printer power Off (O). Remove the extra option. Turn the printer power
On (|). See “Removing Memory Options” on page 210 for more information.
61 Defective
Disk
The printer detects a defective hard disk option. This message appears when you
power On (|) the printer, or during hard disk format or write operations.
Press
Go to clear the message and continue printing. You must install a different hard
disk option before you can perform any hard disk operations.
62 Disk Full There is not enough free space in the hard disk option to store the data that was sent.
• Press
Go to clear the message and continue processing. Any information not
previously stored in the hard disk option is deleted.
• Reset the printer. Press
Menu> or <Menu.TheJOB MENU displays. Press Menu>
or <Menu until Reset Printer appears on the second line of the operator panel
display. Press
Select.
Note: Resetting the printer deletes all current data from the print buffer, including all
Print and Hold jobs. See
Reset Printer on page 70 for more information.
63 Unformatted
Disk
The printer detects an unformatted hard disk option. This message appears when you
powerOn(|)theprinter.
You must format the hard disk option before you can perform any hard disk operations.
To format the hard disk option, select
Format Disk from the UTILITIES MENU.
Press
Go to clear the message and continue printing. If the error message remains,
the hard disk option may be defective and need replacing. Hard disk operations are
not allowed until the defective disk is replaced and the new one is formatted.
70 - 79 messages Reserved for messages relating to the optional internal print server.
For more information, refer to the online documentation that comes with your printer.
Also, refer to the documentation that comes with the optional internal print server.
200 Paper Jam
Remove Cartridge
The printer detects a paper jam. Open the upper front door, remove the print cartridge,
and gently remove the jammed print material. Reinstall the print cartridge and close
the upper front door. See “200 and 201 Paper Jam - Remove Cartridge” on page 184
for more information.
Press
Go to clear the message and continue printing. The printer prints a new copy of
the page that jammed if
Jam Recovery is set to On or Auto.However,theAuto setting
does not guarantee the page will print.
201 Paper Jam
Remove Cartridge
The printer detects a paper jam. Open the upper front door, remove the print cartridge,
and gently remove the jammed print material. Reinstall the print cartridge and close
the upper front door. See “200 and 201 Paper Jam - Remove Cartridge” on page 184
for more information.
Press
Go to clear the message and continue printing. The printer prints a new copy of
the page that jammed if
Jam Recovery is set to On or Auto.However,theAuto setting
does not guarantee the page will print.
Attendance Message Meaning and Required Action