Filter
Top Products
228
Chapter 13: Infrared Adapter
3 Plug the adapter cable into the infrared port.
4 Reconnect the printer power cord to a properly
grounded electrical outlet.
If any light on the infrared adapter comes on when
the printer is plugged in, the adapter is connected to
the port correctly.
5 Aim the computer infrared port at the infrared
port on the front of the Tri-Port interface option
card.
Refer to the documentation that came with your
computer for information about your computer
infrared port.
6 Draw an imaginary line between the two infrared
ports. Aim the infrared port on your computer
within 15 degrees of either side of this line, as
shown.
7 Send a job to print.
If the job does not print correctly, see
Infrared Adapter
on page 181.
Adapter
Cable
Infrared
Port