Filter
Top Products
74
Chapter 3: Using the Operator Panel and Menus
Download Target RAM*
Flash
Disk
The Download Target menu item specifies the storage location for downloaded resources,
such as fonts and macros.
Storing downloaded resources in flash memory or hard disk is permanent storage rather than
the temporary storage that RAM provides. You can add resources to flash memory or to the
hard disk until the option is full. Use your software application or the printer Toolkit to
download resources to the printer.
The
Download Target menu item only displays if a formatted flash memory option or hard disk
option is installed in the printer and is
not
defective or Read/Write or Write protected.
51 Defective Flash or 61 Defective Disk may display when the printer is turned on, or during
format and write operations. See
51 Defective Flash on page 161 or 61 Defective Disk on
page 165 for more information.
Disk does
not
display for Download Target if Job Buffer Size is set to 100%.SeeJob Buffer
Size
on page 77 for more information.
If neither option is installed,
Download Target does
not
display and all downloaded resources
are automatically stored in printer memory (RAM).
Print Timeout Disabled
1…255 (90*)
The Print Timeout setting determines the time (in seconds) the printer waits before printing
the last page of a print job that does not end with a command to print the page. The print
timeout counter does not start until the
Waiting message displays.
When a print timeout occurs, the printer stores the page in the print buffer.
Select
Disabled to turn Print Timeout off. When Print Timeout is disabled, the printer does not
print the last page of a print job until one of the following occurs:
• The printer receives enough information to fill the page.
• The printer receives a Form Feed command.
• You select
Print Buffer from the JOB MENU. See page 70 for more information.
Wait Timeout Disabled
15…65535 (40*)
The Wait Timeout setting determines the amount of time (in seconds) the printer waits to
receive additional bytes of data from the computer. When this timeout expires, the print job is
canceled.
Select
Disabled to turn Wait Timeout off.
Wait Timeout is only available when using PostScript 3 emulation. The setting has no effect
on PCL emulation print jobs.
SetupMenu(continued)
Menu Item Values
*Factory default