Filter
Top Products
9
Loading the Standard Input Tray
6 Place the paper against the left side of the input
tray and insert it under the metal stop.
Makesuretherecommendedprintsideisfacedown
andthefrontedgeisplacedtowardthefrontofthe
input tray.
For information on how to load letterhead, see
“Printing on Letterhead” on page 135.
Note: Make sure the paper fits
easily under the metal stop and
is not bent or wrinkled. Do not
raise the metal stop or force
paper under the metal stop.
Overfilling the input tray may
cause paper jams.
7 Do not exceed the maximum stack height indi-
cated by the line under the arrows.
Note: Overfilling the input tray
may cause paper jams.
Metal Stop
Stack Height
Indicator