Filter
Top Products
59
Operator Panel Menus
Job Menu
Some JOB MENU menu items are available when the
printer displays the
Ready message and is idle since it is
not accepting, formatting, or printing a job. Other menu
items in JOB MENU are only available when the printer is
busy processing or printing a job, when a printer message
other than
Ready displays, or when the printer is in Hex
Trace
mode.
Note: For documentation pur-
poses,
Print and Hold jobs
refers
to any of the following jobs: Con-
fidential Job, Reserve Print Job,
Repeat Print Job, and Verify
Print Job. See page 108 for
more information on Print and
Hold jobs.
Job Acct Stat Print
Clear
The Job Acct Stat menu item only displays if a hard disk option is installed in your printer and
is
not
defective or Read/Write or Write protected. Job Accounting in the SETUP MENU must
be set to
On.
Select
Print to print a list of statistics for a defined number of the most recent print jobs. (The
number of jobs is determined by the value of the
Job Acct Limit menu item in the
SETUP MENU). The statistics include if the job printed with or without errors, the time required
to print the job, the size (in bytes) of the job, the requested paper size and paper type, the total
number of printed pages, and the number of copies requested.
Select
Clear to delete all accumulated job statistics from the hard disk option. Clearing Job
Accounting Stat
displays until the process completes. See Clearing Job Accounting Stat on
page 152 for more information.
Hex Trace Press
Select to enter Hex Trace mode.
Hex Trace helps isolate the source of a print job problem. With Hex Trace selected, all data
sent to the printer is printed in hexadecimal and character representation. Control codes are
not run.
To ex it
Hex Trace, turn the printer power Off (O), or reset the printer. To reset the printer, press
Menu> or <Menu. JOB MENU displays. Press Menu> or <Menu until Reset Printer appears on
the second line of the operator panel display. Press
Select.
Note: Resetting the printer deletes all current data from the print buffer, including all Print and
Hold jobs. See
Reset Printer on page 70 for more information.
Utilities Menu (continued)
Menu Item Values