Filter
Top Products
1-2
Getting
Started
Getting Started
Getting Started
Regulatory information
Customer information
United States of America
This equipment complies with Part 68 of FCC rules and the requirements adopted by the ACTA. On the rear
panel of this equipment is a label that contains, among other information, a product identifier in the format US:
DKUFA02B001J. If required, this number must be provided to the phone company.
The REN is used to determine the number of devices that may be connected to a phone line. Excessive RENs on
a phone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the
sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line,
as determined by the total RENs, contact the local phone company. The REN for this product is part of the prod-
uct identifier that has the format US:DKUFA02B001J. The digits represented by 02 are the REN without a deci-
mal point.
Your fax is designed for use on standard-device phone lines. The fax connects to the phone line with a standard
line called the USOC RJ-11C.
A plug and jack used to connect this equipment to the premises wiring and phone network must comply with the
applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant phone cord and modular plug
is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant.
See installation instructions for details.
If this equipment MFX-2830 causes harm to the phone network, the phone company will notify you in advance
that temporary discontinuance of service may be required. But if advance notice isn’t practical, the phone com-
pany will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with
the FCC if you believe it is necessary.
The phone company may make changes in its facilities, equipment, operations or procedures that could affect the
operation of the equipment. If this happens the phone company will provide advance notice in order for you to
make necessary modifications to maintain uninterrupted service.
If trouble is experienced with this equipment MFX-2830, see operating instructions for details. For further repair
or warranty information, please contact Muratec Customer Support Center at 800-347-3296 (from the U.S. only).
If the equipment is causing harm to the phone network, the phone company may request that you disconnect the
equipment until the problem is resolved.
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public ser-
vice commission or corporation commission for information.
If your home has specially wired alarm equipment connected to the phone line, ensure the installation of this
MFX-2830 does not disable your alarm equipment. If you have questions about what will disable alarm equip-
ment, consult your phone company or a qualified installer.