Filter
Top Products
FAX
Chapter2
FAX Chapter2
●
Advanced Fax Features
3-108
If you enter an incorrect
code, press [Clear] to de-
lete it and then enter the
correct one.
Note
Press RESET to return to
the standby screen.
Note
I.D. code must be entered
to print out stored docu-
ments, etc. Make a record
not to forget it.
Note
When Erase Tx Doc has
been set to [ON], docu-
ments are deleted after
polling transmission.
Note
■ Setting deletion of documents after transmission
I.D.Code :
Bulletin Box
Select item to edit.
Enter
2/2
Erase Tx Doc:OFF
(1) Press [ ] [ ], then press
[Erase Tx Doc].
I.D.Code :
Bulletin Box
Select ON/OFF and select [Enter].
Enter
2/2
Erase Tx Doc:OFF
Enter
Cancel
Erase Tx Doc
OFF ON
(2) Select either [ON] or [OFF],
then press [Enter].
■ Entering an I.D. code
Bulletin Box
Select item to edit.
Enter
2/2
Erase Tx Doc:OFF
I.D.Code :
(1) Press [I.D.Code].
Bulletin Box
Enter I.D.Code/password
Enter
2/2
Erase Tx Doc:OFF
I.D.Code :
Clear
Enter
I.D.Code
****
_
Cancel
(2) Enter the I.D. code (4 digits)
using the numeric keypad,
then press [Enter].
5
To continue to register other
F-code boxes, press [Enter], then
repeat from step 5 of “Registering
F-code boxes” on page 3-100.