Filter
Top Products
1-9
Getting Started
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
Common
Settings
In This
Case...
Appendix
Getting Started
Use supplies manufactured specifically for Muratec machines
Using toner bottles and other supplies that are not manufactured spe
-
cifically for Muratec machines may affect the operation of your unit.
Avoid temperature fluctuations
Sudden changes in temperature can cause damaging condensation to
form inside your machine.
Do not put furniture or equipment on the power cord
Do not put anything on or over the electrical power cord, and do not
route the power cord under rugs or carpets. Doing so can damage the
power cord or fax, and can cause fire or electrical shock.
During electrical storms, disconnect the plug from the outlet
Electrical storms can cause electrical shock or damage the machine.
Never handle your machine or power cord with wet hands
Never touch your machine or power cord if your hands are wet.
Allow clearance around the outlet
Don’t stack boxes or furniture around the outlet.
Storing and handling the toner bottle
To avoid damage to your machine and to assure the best performance possible, follow these guidelines when stor-
ing and handling toner bottles:
Store the toner bottle
Store toner bottles at a constant temperature within a range of 50ºF to 95ºF (10ºC to 35ºC). Do not store bottles
in locations subject to extreme fluctuation of temperature and humidity.
Do not stand the bottle on its end and do not store it upsidedown.
Do not open the protective bag of the bottle until you are ready to install the bottle.
Do not store bottles in areas of:
· Direct sunlight
· Dusty conditions
· Near floppy disks or other computer media, computer screens, or any other materials sensitive to magnetic fields.