Muratec MFX-2830 All in One Printer User Manual


 
In This Case...
Maintenance and Troubleshooting
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
Common
Settings
In This
Case...
Appendix
5-35
When Power Failure Occurs
Documents erased notification
When the image data stored in memory is erased by accident, a notification will be printed as
soon as the power comes back, listing information about the erased image data.
The following is an example of a received file that has been erased. In addition, “Command
erased”, “Erased Poll Documents” and “F-Code box document erased” may be printed.
1. No.
The number of the communication
2. Name
Registered in the following order
(1)TTI number registered for the contact name
(2)Space
3. Mode
Resolution in the communication
4. Start Time
The time the communication started
5. Time
The time required for the communication
6. Number of Pages
The number of pages received
7. Dept.
When “Department Management” has been set, the
department number is recorded here.
8. Result
Communications results.
· OK ...................Completed normally
· * .................... Communicated in ECM mode
· # .................... Communicated via super G3
· Error code ....... Finished abnormally (For details
of error codes, refer to page 5-25.)
9. Note
· Polling .............Polling reception
· Manual ............Manual reception
·
F-Code polling
...Indicates F-Code polling
· F-Code security box
.................... Received in F-Code security box
· F-Code relay ...Received by F-Code relay
· F-Code bulletin box ... Received in F-Code bulletin
box
1 2 3 4 5 6 7 8 9