Muratec MFX-2830 All in One Printer User Manual


 
1-50
Getting
Started
Getting Started
Basic Settings (Setting Mode)
Configure the settings required by the machine.
Operating tips
Registration items in User Install are as follows:
· Language setting
You can select the language displayed in the Touch screen among English, French and Spanish. The de-
fault setting is English.
The selected language will be applied to the output list as well as the screen display; however, the voice guidance is
available only in English.
Note
· Time setting
This is used to correctly set the display time. This is basic to all fax operations, such as the Delayed trans-
mission and Journal. Enter the year, month, day, hour, and minutes. Use the 24-hour clock to enter the
time.
· Daylight saving time setting (DST)
When this setting is ON, your machine automatically recognizes DST at 2 A.M. on the appropriate swi-
tchover Sunday each year. When the setting is OFF, no automatic change will occur.
· Communication line
Set this to match the type of line to which the machine is connected. If the wrong setting is made, tele-
phoning and faxing cannot be performed.
· Reception mode
Select the desired reception mode from Fax Ready Mode, Tel Ready Mode, Tel/Fax Ready Mode, Fax/Tel
Ready Mode, or Ans/Fax Ready Mode.
Refer to page 1-55 for information regarding how to select the reception mode.
Reference
· Dial tone detection
This is used to detect the dial tone. Select OFF normally. Change to ON if the detection is required, how-
ever, which will prevent the fax transmission through the line that does not send the dial tone.
· Senders name
This makes it easy to show the senders name to the receiving party, to print the name on the document
received by the receiving party, and for the receiving party to tell where the document came from. Three
types of sender’s name can be set, and up to 22 characters can be entered for each type.
· Standard TTI
Of the set three types of sender’s name, the sender’s name that is used most often can be set as the stan-
dard sender name.
· TTI number
The fax number of this machine can be shown to the receiving party or printed on the document received
by the receiving party. Up to 20 digits can be set.