Filter
Top Products
FAX
Chapter3
FAX Chapter3
●
Communication Management
3-156
Blocking Junk Faxes
You can block junk faxes several ways, such as only allowing faxes to be received from num-
bers registered in one-touch key or speed-dial or by setting the machine to block faxes from
designated numbers.
There are 3 ways to block junk faxes.
Mode 1: This method sets the machine to receive faxes only from contacts registered in one-touch key
and speed-dial. The last four digits of the registered fax number are checked against the con-
tact’s ID, and the fax will only be received if they match.
Mode 2: This method requires you to register specific junk fax numbers, and then the machine blocks
any faxes from those numbers. The final four to eight digits of the applicable fax numbers are
registered. Up to 50 contacts (fax numbers) can be entered.
Mode 3: This method is a combination of methods 1 and 2. The machine blocks faxes from any num-
bers not registered in one-touch key or speed-dial. The machine also blocks faxes from con-
tacts registered as junk fax numbers.
OFF: Junk faxes are not blocked.
Receive
Not Receive
Mode 1
Not
receive
Receive
Mode 2 Mode 3
Not
receive
Not receive
:Incoming numbers
:Numbers registered in one-touch key and speed-dial
:Numbers registered as junk fax numbers
Operating tips
Set block junk faxes Default: OFF
1
Press SETTING.
Enter
Speed Dial
Copy
Functions
User
Install
Group Name
Store Doc
Settings
Management
Scanner
Settings
Settings
Paper
Settings
Fax
Functions
Counter
Select item to edit.
2
Press [Fax Functions].