Filter
Top Products
FAX Chapter3
●
Communication Management
Getting
Started
COPY
Chapter1
COPY
Chapter2
COPY
Chapter3
FAX
Chapter1
FAX
Chapter2
FAX
Chapter3
FAX
Chapter4
Common
Settings
In This
Case...
Appendix
3-153
Managing Communications
How to read journal report
Printout Example
1. No.
Communications (fax) number
2. Name
Information is recorded in the following order.
(1) Contact name registered in speed-dial etc.
(transmission only)
(2) Fax numbers registered in speed-dial or those
designated by the numeric keypad (transmission
only)
(3)TTI registered in the receiving party
(4)TTI number registered in the receiving party
(5)Blank
3. Mode
Resolution used for the fax
4. Start time
Time communications started
5. Time
Time required from the start to the completion of
communications.
6. No. of pages
Number of pages communicated
7. Dept.
When “Department Management” has been set, the
department number is recorded here.
8. Result
Communications results as follows are printed here.
· OK ............................Completed normally
· * ............................... Communications were per-
formed in ECM mode.
· # ............................... Communications were per-
formed via super G3.
· Error codes .............. Finished abnormally. Resend
your document.
(For details of
error codes, refer to page 5-25.)
9. Note
· Polling ......................Indicates polling.
· F-Code ..................... Indicates F-code transmis-
sion.
· F-Code polling ......... Indicates F-Code polling.
· Security box ............. Indicates F-code security box
communications.
· F-Code relay ............ Indicates F-code relay com-
mand communications.
· Bulletin box ............. Indicates F-code bulletin box
communications.
· Broadcast ................. Indicates broadcast commu-
nications.
· Batch Tx ..................Indicates batch transmission.
· Manual .................... Indicates manual transmis-
sion or reception.
· Forward ................... Indicates fax forwarding com-
munications.
1 2 3 4 5 6 7 8 9