Muratec MFX-2830 All in One Printer User Manual


 
1-8
Getting
Started
Getting Started
Power requirements
Plug in the power cord
Plug the power cord carefully and completely into a wall outlet.
Do not leave any portion of the electrical cord’s metal plugs ex
-
posed. Doing so could cause a fire and increases the risk of elec
-
trical shock.
Do not share an extension cord connector with other
plugs
It can cause electrical shock.
Do not share an outlet with a large appliance
High-consumption appliances such as a refrigerator or air con
-
ditioner can cause “draw-downs” which could damage your ma
-
chine.
AC120V
120 VAC outlet
Use a standard three-pronged 120 V electrical outlet to power
your machine. Using any other electrical outlet will damage to
your machine.
For domestic use only
Never use your machine outside the country in which you pur
-
chased it. Doing so may violate telecommunication and safety
regulations of that country, and variations in electrical and
phone standards can cause poor performance and damage your
machine.
General Precautions
Never disassemble your machine!
Disassembling your machine can cause serious injury to you and
damage to your machine. If service is required, call your autho
-
rized Muratec dealer.
Keep away from liquids
Keep liquids and metal pins or other objects away from your ma
-
chine. If something falls into the machine, remove the plug from
the outlet and call your authorized Muratec dealer.