Filter
Top Products
1-32
Getting
Started
Getting Started
Loading paper into bypass tray
Use the bypass tray to print on plain paper, postcards, envelopes, OHP film and label sheets. The
loaded paper will be printed on the downward side.
·When loading anything other than plain paper, the paper type must be set. (see page 1-38)
·When loading custom size paper, the paper size must be registered. (see page 1-37)
Reference
Extension
tray
Bypass
tray
1
Open the bypass tray.
Extension
tray
● When loading paper that is larger
than the bypass tray, open the ex-
tension tray.
Guide plate
2
Align the guide plate to the pa-
per size, face the printing surface
downward, and load the paper by
inserting its edge all the way to
the back.
· Load the paper so that it
does not go higher than
the ▼ mark.
· Align the guide plate
firmly against the edge
of the paper.
NoteNote