15-1
15
Signaling and Hardware
Monitoring
Signaling Monitoring
To monitor the LAN port connection status and gateway registration
information of the device you are using, click Signaling Monitor in the RMX
Management pane. The signaling status list will be displayed in the list pane
on the right side.
Figure 15-1 Signaling Monitor Pane
The LAN1 and LAN2 ports may be in one of the following three states:
• Link up: Connected
• Link down: Disconnected
• Disabled: Port disabled
The gatekeeper may be in one of the following four states:
• Registered: Registered with the gatekeeper
• Unregistered: Not registered with the gatekeeper