Filter
Top Products
Polycom RMX 1000 User Guide
2-3
Figure 2-5 Product Activation Page
Modifying the Default IP Address
After accessing the RMX 1000 Web configuration interface, you can modify
the default IP address for the device based on the settings of your local
network.
1 Click the IP Setting configuration item in the RMX Management pane.
2 In the IP Setting configuration pane, right-click, and select LAN1 ->
Properties.
3 In the LAN1 Settings dialog box, set the IP address obtained from the
network administrator, and configure the device for use on your local
network.
Figure 2-6 Modifying the IP Address
Table 2-1 LAN Port Setting Parameters
Parameter Description