Filter
Top Products
Polycom RMX 1000 User Guide
3-9
If no password is set for the conference, the call-in number to be used by
participants is: 9251001.
If passwords are set for the conference, for example, if the conference
password is 1111 and chairperson password is 2222, a regular participant
would dial 9251001##1111, while a chairperson would dial 9251001##2222 or
9251001##1111##2222.
Dial-in – RMX 1000 Not Registered to GK
If no gatekeeper is configured for the network service, see the below table for
the proper number to be dialed by the endpoint.
Table 3-4 Dialing Number – RMX 1000 not Registered to GK
Dialing Scenario Dialing Number
No password is set
for conference
[RMX 1000 IP Address] ## [Conference ID]
Passwords are set
for the conference
[RMX 1000 IP Address] ## [Conference ID]##[Password]
Note:
If the password is the conference password, the user will
be joining as a regular participant. If the password is the
chairperson password, the user will be joining as chairperson.
Alternatively:
[RMX 1000 IP Address] ## [Conference ID]##[Conference
Password]##[Chairperson password]
For example:
RMX 1000 IP address: 172.22.30.40
Conference ID: 1001
Thus, the call-in number to be used by participants is: 172.22.30.40##1001.
If the passwords are set for the conference, for example, if the conference
password is 1111 and chairperson password is 2222, a regular participant
would dial 172.22.30.40##1001##1111, while a chairperson would dial
172.22.30.40##1001##2222 or 172.22.30.40##1001##1111##2222.
If the Conference ID the user entered does not exist, the RMX 1000 will create a new
conference with this conference ID. For more information, see Starting a Conference
Using the Remote Control.