Filter
Top Products
Polycom RMX 1000 User Guide
11-7
Parameter Description
compatibility mode in which routing is based on
Precedence priority settings only. Select
None
if you do
not know which standard your router supports.
Ports
To specify fixed ports for usage with a firewall, click the Ports tab.
Figure 11-7 Advanced Setting – Ports
The table below explains the detailed meanings of port setting parameters.
Table 11-5 Description of Port Settings
Parameter Description
Fixed Ports
Leave this check box clear if you are defining a Network
Service for local calls that does not require configuring a
firewall to accept calls from external entities.
When un-checked, the system uses the default port range.
Select this option to enable other port ranges or to
configure the ports to be used.
TCP/UDP ports from
Shows the default TCP/ UDP port range. The user can set
the start port number here, and the end port number will be
calculated automatically.
If the network administrator does not specify an adequate port range, the system will
accept the settings and issue a warning. Calls will be rejected when the MCU’s ports
are exceeded even if hardware ports are still available on the RMX 1000.
To set the address and account information for outgoing conference
notification Email messages, click the Email tab.
Email