Filter
Top Products
Chapter 16 -
16-2
Personal Conference Manager (PCM)
Introduction to PCM and Operations
You can control RMX 1000 via the endpoint PCM and remote control. When
you use a regular remote control, RMX 1000 enables you to operate the
menus through FECC or DTMF. If the endpoint is FECC/DTMF-enabled,
you can also control the remote camera to select each menu option you want
on the PCM.
The FECC and DTMF control keys are defined as follows.
Table 16-1 FECC Control Keys
FECC Description
Return to the higher-level menu
Delete the character before the cursor (while inputting menu
names)
Exit the menu and display the video (if the top level menu is
displayed)
Shift the selection to the left video
Bring up the menu (if the conference videos are displayed)
Go to the lower level menu
Confirm the selection (if the menu is displayed)
Shift the selection to the right video
Bring up the menu (if the conference videos are displayed)
Return to the higher-level menu, if the menu is displayed (cyclic)
Shift the selection to the above video
Bring up the menu (if the conference videos are displayed)
Go to the lower-level menu, if the menu is displayed (cyclic)
Shift the selection to the below video
Bring up the menu (if the conference videos are displayed)
Zoom Out
Exit a specific state (under some specific states)
Go to the previous page
Zoom In
Confirm the selection (under some specific states)
Go to the next page
Table 16-2 DTMF Control Keys
DTMF Description
0
Shortcut key (if the conference videos or the menu is displayed)
Input numbers (while inputting menu names)
Return to the conference state (under DTMF state)
1 – 9
Shortcut key (if the conference videos or the menu is displayed)
Input numbers (while inputting menu names)
*
Enable the DTMF function of the Polycom remote control (if the
conference video or the menu is displayed)
Enter a period “.” (while inputting IP addresses to invite participant)