Filter
Top Products
5-1
5
Recording Link
The RMX 1000 supports the recording link function. It can work with the RSS
2000 to record conference content. After the recording setup is completed,
when the conference starts, the RMX 1000 will first call the participants in the
participant list, and then call the configured RSS 2000 to record the
conference. The recording link is displayed in the List pane as a regular
participant, thereby enabling users to view and control the recording status
easily.
To record a conference running on the RMX 1000 through the RSS 2000, make
sure to verify the following:
• The profile used for the conference has enabled the recording function.
For details, refer to
Conference Recording.
• The information of the RSS 2000 is configured on the recording
connection. For more information, see Recording Setup below.
Recording Setup
In the RMX Management pane, click Recording Link. The Recording Link
interface appears in the list pane located on the right side. Here you can view
the IP address and alias configured for the RSS 2000.
Figure 5-1 Recording Link