Filter
Top Products
Polycom RMX 1000 User Guide
4-9
Figure 4-8 Recording Parameter Setup Interface
The table below explains the configuration parameters.
Table 4-6 Conference Recording Configuration
Parameter Description
Enable Recording
If an RSS 2000 is available on your network, you can select
this option to enable the recording function.
Start
Select the start time of the conference recording:
Immediately – The recording automatically starts
immediately after the first participant joins the conference.
Upon Request – The operator or chairperson starts the
recording manually. After this option is selected, the
recording can be manually started through the Web interface
or DTMF function. For more information, see
Recording
Control
.
Audio Only
If this option is selected, only the conference audio will be
recorded.
• The recording parameters can be set here only after the IP address of the RSS
2000 is configured on the Recording Link interface. For how to set Recording Link,
see Recording Link.
• The recording link occupies one conference resource.
Modifying a Profile
To modify a saved profile, right-click it in the Profile list, and then click
Profile Properties to modify its properties. For explanation of the
configuration parameters, see
Defining a Profile.
Deleting a Profile
To delete a profile, select it in the Profile list, and then click ; Alternatively,
right-click the desired profile and then click Delete Profile.
A profile in use cannot be modified or deleted.
Setting a Default Profile
After a default profile is set, endpoints will use it when creating a conference
from the lobby. In addition, when users create a meeting room, reserve a
conference, or convene an instant conference via the Web interface, the