Filter
Top Products
Chapter 6 -
6-2
Meeting Rooms
General Settings
Figure 6-2 New Meeting Room - General
The table below explains the detailed meanings of these parameters.
Table 6-1 Parameter Description for New Meeting Room – General
Parameter Description
Meeting Room
Name
Set a unique name to identify the meeting room. When a
meeting room is created, the system will automatically
generate a unique name for it.
Profile
Select the profile to be used for this conference from the
drop-down list. The lower part of this option displays the major
parameter values defined for the profile:
Line Rate: The bandwidth of the conference link;
Minimum ports to be reserved: The minimum number of
conference participants. Automatic indicates that the number
of video participants is determined according to the available
resource of the RMX 1000.
The conference profile defines the basic parameters of
conference scheduling, such as the bandwidth, encryption, and
video quality. For more information on profiles, refer to
Conference Profiles. When a conference is created, the system
selects the default profile of the device by default.
Duration
Specify the conference duration in the range of 0-24 hours. The
input format is H:M and the default value is 2:0.
ID
When a meeting room is created, the system automatically
allocates a conference ID. You can also set a unique
conference ID. To directly dial into the conference, the
participant must know its ID.
Conference
password
Enter the conference password. To connect to this conference,
the participant must enter this password. If this parameter is
empty, it means the conference has no password.
Chairperson
password
Enter the password that identifies the chairperson ID. The
system will authorize more rights to the chairperson. If this
parameter is empty, it means the conference has no
chairperson.