Filter
Top Products
Polycom RMX 1000 User Guide
9-9
Figure 9-6 Participant Properties
The parameters displayed on the General, Advanced, and Information tabs are
the same as those for adding a new participant. For explanation on
configuration parameters, see
Adding a Participant to the Address Book.
The Connection Status tab shows the status and detailed information of the
participants, including time of connecting/disconnecting, cause of
disconnecting, network transfer rate, packet loss ratio, audio, video, H.239
dual-stream protocol, etc.
The Media Source tab can be used to customize layout for participant’s
endpoint after the layout mode is set to Conference Layout.
The Message Overlay tab is used to set the message overlay of the participant’s
endpoint. For explanation on the configuration parameters, see
Table 9-2
Setting Message Overlay
.
Participant Control
You can control and modify the participant’s connection status of an ongoing
conference through the buttons in the Participant list pane, the Participant
right-click shortcut menu, and the Participant Properties interface.
The table below explains all the buttons in the Participant list pane.
Table 9-4 Buttons in the Participant List Pane
Button Name Description
New
Participant
Define a new participant. For more information about the
New Participant dialog box, see
Creating a Participant in
the Address Book
.
Connect
Participant
Connect a disconnected defined dial-out participant to the
conference.
Disconnect
Participant
Disconnect the participant from the conference.