Filter
Top Products
Chapter 11 -
11-4
Network Service
Routers
Figure 11-4 Advanced Setting – Routers
The Routers page displays the information for the configured routes in the
system. The RMX 1000 packets will be transmitted via these static routes.
You can modify or delete an existing route by selecting the route, or just click
the New button to create a new route. The table below shows the
descriptions for route parameters.
Table 11-2 Routers Setting
Parameter Description
Router IP Address
Set the IP address for the sending router of packet
transmission
Remote IP Address Set the target network address for packet transmission
Subnet Mask Set the subnet mask for the target network
You cannot modify the default route on this page. To set the default route, select the
IP Setting -> Properties page, and then select the Set as Default check box next to
the configured gateway. For more information, see IP Setting.
Gatekeeper
Click Gatekeeper on the Advanced Setting page. If the user network is
configured with a gatekeeper device, you have the option to register RMX
1000 with the gatekeeper and configure the related parameters.