Filter
Top Products
Synology DiskStation User's Guide
Based on DSM 3.1
14 Chapter 1: Synology DiskStation at a Glance
10-Bay Models
2U RackStation
No. Article Name Location Description
1) Power Button Front Panel
The Power Button is used to turn Synology RackStation on or off.
To turn off Synology RackStation, press the Power Button and hold it
until you hear a beep sound and the Power LED starts blinking.
2) Beep off Button Front Panel
The Beep off Button is used to turn off the beep sound of
Synology RackStation.
3) LED Indicators Front Panel
The LED indicator is used to display the status of the internal disk and
the system. For more information, see "Appendix B: LED Indication
Tables" on Page 226.
4) Hard Drive Tray Front Panel
The hard drive tray is designed for loading the hard drives used in
Synology RackStation.
5)
Power Port Back Panel
The power port is where you connect the power cord to
Synology RackStation.
6) Fan Back Panel
The power fans are built to exhaust waste heat out of the power supply.
The system fans (inside RackStation) are built to exhaust waste heat
out of RackStation. If the fan is not working, the RackStation will “beep”
every few seconds.
7) Console Port & VGA Port Back Panel
This port is used for manufacturing use only.
8)
USB Port Back Panel
The Synology RackStation offers USB ports for adding additional
external hard drives, USB printers, or other USB devices.
9) LAN Port Back Panel
The LAN port is where you connect RJ-45 cable to
Synology RackStation.
10)
RESET Button Back Panel
1. To restore IP, DNS, passwords for the admin account to default value.
2. To reinstall the Synology RackStation.
11)
Expansion Port Back Panel
The Expansion port is used to connect Synology Expansion Unit
1
Synology RackStation.
to
---------
1
Synology Expansion Unit is supported on specific models only. Please visit www.synology.com.