Synology DiskStation User's Guide
Based on DSM 3.1
199 Chapter 14: Safeguard Your Environment with Surveillance Station
To add a VisualStation:
1 Click on the Add button.
2 The search result will show all the VisualStations within the network. Select the VisualStation that you would
like to pair. Make sure the status of the VisualStation is Unlocked.
3 Click on Next to continue to Network Settings.
Create a name for the VisualStation.
Define LAN configuration.
4 Click on Next to continue to Camera Settings.
Select VisualStation's channel layout. The selected setting will be reflected on the preview area below.
All the cameras added on the Surveillance Station are also listed on this page. Select the camera you would
like to show on VisualStation, and drag to the preview area.
5 Click on Finish to save the settings.
6 Press and hold the Lock button on the VisualStation unit for 3 seconds. The LED light will glow solid green
when its status is changed to Locked.
To edit the settings of a VisualStation:
1 Select the VisualStation you would like to edit. Double click on it or click on Edit to proceed.
2 Edit the corresponding settings.
3 Click on Save to finish.
To enable/disable a VisualStation:
1 Select the VisualStation you would like to enable/disable.
2 Click on the Enable button on the top of the page.
3 Select Enable or Disable.
Note: Disabling VisualStation will not delete its settings.
To delete a VisualStation:
1 Select the VisualStation you would like to delete.
2 Click on the Delete button on the top of the page.
3 Click on Yes to finish.
To restore VisualStation to factory default:
1 Press and hold the RESET button at the back of the VisualStation until you hear a beep.
2 The status of the VisualStation will appear as Reset on the VisualStation list.
To pair the VisualStation with the DiskStation again, you need to delete the entry from the list and add it again.
Follow the delete steps and continue with the add process.