Toshiba 350 All in One Printer User Manual


  Open as PDF
of 302
 
1 - 2
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
1
e-STUDIO350/352/353/450/452/453
SPECIFICATIONS
* System copy speed
Copy mode
Sec.
e-STUDIO
350/352/353
e-STUDIO
450/452/453
Single-sided originals
↓
Single-sided copies
1 set
3 sets
5 sets
20.85
57.95
91.20
17.49
46.68
73.50
Single-sided originals
↓
Double-sided copies
1 set
3 sets
5 sets
27.42
62.18
97.55
25.71
57.41
89.03
Double-sided originals
↓
Double-sided copies
1 set
3 sets
5 sets
55.47
126.21
196.93
54.68
118.07
181.36
Double-sided originals
↓
Single-sided copies
1 set
3 sets
5 sets
48.22
117.44
184.96
48.20
102.18
155.06
• First copy time ................... e-STUDIO350/352/353: Approx. 3.9sec. or less
e-STUDIO450/452/453: Approx. 3.9sec. or less
(A4/LT, upper drawer, 100%, original placed manually)
• Warming-up time ............... Approx. 20 seconds (temperature: 20°C)
• Multiple copying ............... Up to 999 copies; Key in set numbers
• Reproduction ratio ............. Actual ratio: 100±0.5%
Zooming: 25 to 400% in increments of 1%
(25 to 200% when using RADF)
• Resolution/Gradation ........ Scanning: 600 dpi x 600 dpi
......... Printing: Equivalent to 2400 dpi x 600 dpi
......... Gradation: 256 steps
* The system copy speed, including
scanning time, is available when
10 sheets of A4/LT size original are
set on RADF and one of the copy
modes in the left table is selected.
The period of time from pressing
[START] to the paper exit complete-
ly out of the equipment based on
the actually measured value.
* Upper drawer is selected and copy-
ing is at the non-sort mode.
* Automatic copy density, APS/AMS
are turned off.
* Finisher is not installed.
07/11
Drawer ADU PFP LCF Bypass copy Remarks
Size
A3 to A5-R
LD to ST-R
A4, LT
A3 to A5-R,LD to ST-R
(Non-standardoruser-specied
sizes can be set.)
Weight
64 to 105 g/m2
17 to 28 lb.
64 to 209 g/m2, 17 to 55 lb.
(Continuous feeding)
50 to 209 g/m2, 13 to 55 lb.
(Single paper feeding)
Special
paper
-
Tracingpaper,labels,OHPlm
(thickness: 80 µm or thicker)
These special papers
recommended by Toshiba Tec
 previous next