Toshiba 350 All in One Printer User Manual


  Open as PDF
of 302
 
e-STUDIO350/352/353/450/452/453
SCANNER
6
6 - 9
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
6.4.2 Exposure lamp
Externalelectrodetypexenonuorescentlampisusedasanexposurelampinthisequipment.
(1) Structure
Fluorescer is applied on the inside surface of the lamp pipe (except a part to be an opening)
whichislledwiththexenongas.
Apairoftheexternalelectrodescoveredbythelmwiththeadhesiveagentisattachedoverthe
pipe.
(2) Behavior inside the lamp
Theelectroninsidethepipeisledtotheelectriceldbyapplyingvoltagetothepairoftheexter
-
nalelectrodes,anddischargeisstarted.Electronsthenowandclashwiththexenonatominside
thepipetoexcitethem,andgeneratetheultravioletray.Thisultravioletrayconvertstheuoresc-
er into the visible light.
PETlm
Aluminum tape
electrode
Adhesive agent,
PET,lm
Glass valve
Fluorescer
Xenon gas
(1)Electrode (2)Electron (3)Xenon atom (4)Ultraviolet ray (5)Fluorescer
(6)Visible light (irradiated from the opening to outside the pipe)
(7)Opening (8)Harness
(1)
(6)
(8)
(7)
(5)
(2)
(4)
(3)
Fig. 6-402
Fig. 6-403
 previous next