Toshiba 350 All in One Printer User Manual


  Open as PDF
of 302
 
e-STUDIO350/352/353/450/452/453
POWER SUPPLY UNIT
15
15 - 3
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
The followings are two output channels which are linked with the door switch.
(1) +5.1V
+5.1VD : CN414 Pin 9
Output to the LGC board
(2) +24V
+24VD1 : CN414 Pins 1 and 2
Output to the LGC board, PFP/LCF (via LGC board)
+24VD1 : CN418 Pin 1
Output to the power supply cooling fan
+24VD2 : CN414 Pins 5 and 6
Output to the LGC board,
Bridge unit / Job separator / Offset tray (via LGC board)
+24VD3 : CN415 Pins 1 and 2
Output to the RADF
+24VD4 : CN415 Pins 9 and 10
Output to the SLG board
+24VD5 : CN416 Pin 3
Outputtothenisher
<<Output connector>>
Not linked with the door switch
CN412 For the SYS board
CN413 For the LGC board, FIL board / FUS board, FAX board (e-STUDIO350/450
only), PFP/LCF (via LCG board), Bridge unit / Job separator / Offset tray (via
LGC board)
CN415 For the SLG board, RADF
CN416 Forthenisher
Linked with the door switch
CN414 For the LGC board, PFP/LCF (via LGC board), Bridge unit / Job separator /
Offset tray (via LGC board)
CN415 For the SLG board, RADF
CN416 Forthenisher
CN418 For the power supply cooling fan
05/11
 previous next