Filter
Top Products
11 - 10
11
e-STUDIO350/352/353/450/452/453
DRUM RELATED SECTION
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
(2) Remove the damper, terminal, spring and
wire.
(B-4) Charger wire cleaning pad
(1) Release the charger wire cleaner shaft from
the hooks of the charger wire cleaning pads.
(2) Remove the charger wire cleaning pads.
Note:
When installing, make sure that 2 charger wire
cleaning pads are away from the wire while the
charger wire cleaner shaft is at the rear side.
Fig. 11-606
Wire
Terminal
Spring
Fig. 11-607
Fig. 11-608
(B-3) Main charger wire
* Length: 363 mm (tungsten wire) diameter:
0.06 mm
(1) Take off each terminal cover of the front and
rear sides.
Fig. 11-605
Damper
06/03