Filter
Top Products
9 - 22
9
e-STUDIO350/352/353/450/452/453
PAPER FEEDING SYSTEM
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 9-449
Fig. 9-448
(9) Disconnect 1 connector of the registration
clutch.
(10) Loosen 1 setscrew and take off the registra-
tion clutch.
Note:
Match the protruding portion of the clutch
with the position shown in the drawing for
assembling.
(11) Disconnect 1 connector of the fan motor.
(12) Remove 1 screw and take off the developer
unit cooling fan-1 unit.
[D] Registration roller
(1)
Take off the bypass unit ( Chapter 9.4 (A-1)).
(2) Take off ADU ( Chapter 14.5 [A]).
(3)
Take off the front cover ( Chapter 2.5.1 [A]).
(4) Take off the cleaner unit ( Chapter 11.6
[A]).
(5)
Take off the rear cover ( Chapter 2.5.1 [H]).
(6) Take off the right rear cover ( Chapter
2.5.1 [G]).
(7) Take off the SYS board cover ( Chapter
2.5.2 [C]).
(8) Take off the developer cooling fan-2
( Chapter 11.6 [I]).
Connector
Setscrew
Screw
Connector
Developer unit
cooling fan-1 unit
05/11